The big news for this week is that the seismic work on the interior of the hotel is coming to a close. The concrete work is finished and all of the testing completed so now, the other contractors can descend upon the site.
First to come is the windows. They had been sitting in a warehouse in Reno since October waiting for the concrete work to be completed but once that hurdle was in the past, installation went very quickly.
The windows are constructed of wood both interior and exterior to please the historic commission with the one compromise being that they are dual pane. The historic commission was okay with this because single pane windows just aren’t available at a reasonable price anymore. In any case, the hotel has become warmer and a lot quieter.
Of course, no progress is ever achieved without the obligatory setback. While the windows were being installed, the wind kicked up and blew the back balcony door shut so hard that the glass shattered and sprayed out over the carport roof.
The door should have been propped open with the vintage brick we keep handy just for that purpose but it wasn’t. In any case, the new glass will be tempered so that’s an improvement.
On a more constructive note, Katie and I found a new stove for the saloon.
It is a Thelin brand stove which was made in Mound House. Thelin stoves have been around for about 40 years and they have an interesting history. The first models were made from transformer housings salvaged from old power poles and the chromed rings were truck rims. Of course, new building standards have made the early Thelin stoves non code compliant but you can see that much of the early design is retained.
Normally, Thelin stoves are quite expensive but thanks to Craigslist, we found this two year old model in Wellington for a fraction of the original price. Now, some may ask why we didn’t use the original parlor stove that came with the hotel. We would have liked to but it would have made the hotel difficult to insure. The Thelin stove we have now is UL listed and comes complete with installation instructions and proper wall clearances stamped on the back. What could be easier?
As for the original saloon stove, we plan on setting it up for decoration someplace as a non functioning unit.